- Indoor and outdoor lighting, shop window lighting and access systems
- Control of compressors
- Control of fans
- Control of pumps
- Control of lifting, conveyor and filling systems
The programmable relay PR110 of akYtec is suited for cost-effective implementation from simple to complex control tasks in various application areas. There are available two modifications with different quantity of input and outputs. Free akYtec ALP software is used for programming.
The programmable relay PR110 of akYtec can be applied as a programmable controller, but with significantly lower costs. Typical areas of application include:
The programmable relay comes in two modifications. The variant of PR110-24.12D.8R has twelve digital inputs on board as well as eight digital outputs. The PR110-24.8D.4R provides eight digital inputs and four digital outputs. Numerous digital inputs and outputs allow the user to connect wide range of sensors and actuators.
The PR110 is desighned in plastic enclosure for DIN rail or wall mounting. Plug-in screw terminals at the upper and bottom side of the device allow their replacement without disconnection of signal cables.
Programmable relay can be easily programmed with function block diagram
Programming of this mini PLC the user can perform due to the freely available and easy to use programming environment akYtec ALP with FBD programming language (IEC 61131-3). This programming environment is available for free (download akYtec ALP here). You can create your own function blocks or macros or use already existent. For this aim, the manufacturer has integrated in the programming environment online database, due to which the user can download pre-built macros of akYtec (or by other users) for free.
Moreover, the software offers a simulation mode and a full overview of resources utilization and their availability in the current project. For transferring an application to the control relay PR110 akYtec offers the programming adapter PR-KP20. This adapter allows connecting the relay with a PC directly over a USB 2.0 port of the PC.
Ordering information
PR110 | - | 24 | . | X.X | - | RTC | |||
I/O | |||||||||
8 DI 4 DO | 8D.4R | ||||||||
12 DI 8 DO | 12D.8R | ||||||||
Real Time Clock |
Variants
PR110-24.8D.4R-RTC | 24 V DC, 8DI + 4DO + RTC |
PR110-24.12D.8R-RTC | 24 V DC, 12DI + 8DO + RTC |
General | ||
---|---|---|
Power supply | 24 (21...27) V DC | |
Power consumption, max. | 6 W | |
Real Time Clock | yes | |
DI/DO status indicators | LED | |
Protocols | Modbus RTU / ASCII (Slave) | |
Mounting | DIN rail / wall | |
Environment | ||
Ambient temperature | -20...+55 °C | |
Storage temperature | -25...+55 °C | |
Humidity | up to 95%, non-condensing | |
IP Code | IP20 | |
Enclosure | ||
Dimensions | 63 x 110 x 73 mm | |
Weight | approx. 210 g | |
Material | plastic | |
Programming | ||
Programming environment | akYtec ALP | |
Programming language | FBD | |
Program memory | 63 FBs | |
Programming interface | UART, USB* | |
Digital inputs (I1...I8) | ||
Quantity | 8 | |
Type | switch contact, PNP open collector, 24±3 V DC | |
Logical states | 1 | 9...27 V DC (3.5...9.0 mA) |
0 | 0...2 V DC (0...0.5 mA) | |
Galvanic isolation | 1500 V, in groups of 4 | |
Digital outputs (Q1...Q4) | ||
Quantity | 4 | |
Type | relay (NO) | |
Galvanic isolation | individual | |
Contact capacity | AC | 5 A, 250 V (resistive load) |
DC | 3 A, 30 V | |
Minimum load current | 10 mA (at 5 V DC) |