Input and Output Modules
The input and output modules of the Mx110 series offer a cost-effective and flexible solution in distributed automation systems. These robust digital and analog modules are used for decentralized data acquisition and process control and also can serve as a good supplement to existing systems or for creating new high-performance systems as well. Due to the proven RS485 bus technology and intelligent functions, such as pulse counter or sensor state diagnosis, the MX110 modules can be used in different fields, such as building technology, process industry, etc. Unlike many other distributed I/O systems, the Mx110 extension modules do not require any bus couplers and/or supply modules since all communication and supply components are present in each individual unit. That's why systems with a small number of I/O points can be economically reasonable.
- - Significant reduction of cabling resulting in the ower susceptibility to interferences
- - Reduced setup times due to direct connection of sensors and actuators
- - Higher flexibility of the entire system due to free placement and easy replaceable elements
- - Betters system adaptability and extensibility
- - I/O signal transmission to a SCADA system or HMI (e.g. operator terminal)
- - Increasing the number of I/O points of a PLC
- - Connection to all automation systems supporting RS485 interface and communication protocols Modbus RTU / ASCII
- - PWM on digital output modules
- - Input pulse counter function
- - Sensor state diagnosis on analog inputs
- - RS485 network state diagnostics
- - Additional logic functions at digital inputs and outputs
- - Transmission protocol auto detection
- - Forcing the outputs to the fail-safe state in the event of a communication error
- - DIN rail or wall mounting
The configuration software is delivered on CD. A simple and convenient interface enables fast and uncomplicated configuration of analog and digital input and output modules. The configuration mask can be saved as a file.
-
The analog input module MV110-24.8A has 8 analog inputs which can be connected to various types of RTDs, thermocouples, position encoders, and standard signals. The more detailed list of possible connection types can be found in the technical data. In addition, the inputs can be used as digital inputs. The available voltage value at the outputs is 10...36 V DC. The module requires 24 V DC power supply and supports Modbus RTU/ASCII communication via a serial RS485 interface. The enclosure provides IP20 rating and can be operated in the temperature range between -20 and +55 °C.Learn More
-
The analog input module MV110-24.8AS has 8 analog inputs (0-10 V, 0-5 mA, 0(4)-20 mA). The module requires 24 V DC power supply and supports Modbus RTU/ASCII communication via a serial RS485 interface. The enclosure provides IP20 rating and can be operated in the temperature range between -20 and +55 °C.Learn More
-
The digital input module MV110-24.16DN has 16 digital inputs able to connect switch contacts as well as NPN or PNP transistors. All the inputs are galvanically isolated in groups of 4. To communicate the input data to a controller, a serial RS485 port and Modbus RTU/ACSII are at your disposal. The module requires 24V DC input power and can operate in the temperature range between -20 and +55 °C.Learn More
-
The digital output module MU110-24.8R has 8 digital outputs (relay). The max. current load is 4 A at 250 V AC or 24 V DC. The outputs are galvanically isolated in groups of 4. The module requires 24 V DC power supply and supports Modbus RTU/ASCII communication via a serial RS485 interface. The enclosure provides IP20 rating and can be operated in the temperature range between -20 and +55 °C.Learn More
-
The digital output module MU110-24.8K has 8 digital outputs (NPN). The max. current load is 400 mA at 60 V DC. The outputs are galvanically isolated in groups of 4. The module requires 24 V DC power supply and supports Modbus RTU/ASCII communication via a serial RS485 interface. The enclosure provides IP20 rating and can be operated in the temperature range between -20 and +55 °C.Learn More
-
The digital output module MU110-24.16R has 16 digital outputs (relay). The max. current load is 3 A at 250 V AC or 30 V DC. The outputs are galvanically isolated in groups of 4. The module requires 24 V DC power supply and supports Modbus RTU/ASCII communication via a serial RS485 interface. The enclosure provides IP20 rating and can be operated in the temperature range between -20 and +55 °C.Learn More
-
The digital output module MU110-24.16K has 16 digital outputs (NPN). The max. current load is 400 mA at 60 V DC. The outputs are galvanically isolated in groups of 4. The module requires 24 V DC power supply and supports Modbus RTU/ASCII communication via a serial RS485 interface. The enclosure provides IP20 rating and can be operated in the temperature range between -20 and +55 °C.Learn More
-
The analog output module MU110-24.6U has 6 analog outputs (0-10 V). The available voltage value at the outputs is 12 ... 36 V DC. The module requires 24 V DC power supply and supports Modbus RTU/ASCII communication via a serial RS485 interface. The enclosure provides IP20 rating and can be operated in the temperature range between -20 and +55 °C.Learn More
-
The analog output module MU110-24.8I has 8 analog outputs (4-20 mA). The available voltage value at the outputs is 10...36 V DC. The module requires 24 V DC power supply and supports Modbus RTU/ASCII communication via a serial RS485 interface. The enclosure provides IP20 rating and can be operated in the temperature range between -20 and +55 °C.Learn More
-
The digital output I/O-Module MU110-24.8D.4R has 8 digital inputs which are implemented as switch contacts and NPN. In addition, there are also 4 digital outputs (relay) available. The module requires 24 V DC power supply and supports Modbus RTU/ASCII communication via a serial RS485 interface. The enclosure provides IP20 rating and can be operated in the temperature range between -20 and +55 °C.Learn More
-
The module MU110-24.1TD is a 1-channel input module for resistor bridges (strain gauge). The module enables the direct connection of a resistor measurement bridge. The module requires 24 V DC power supply and supports Modbus RTU/ASCII communication via a serial RS485 interface. The enclosure provides IP20 rating and can be operated in the temperature range between -20 and +55 °C.Learn More
-
The module ME110-230.3M is an input module for measuring the electrical data in a 3-phase AC power system and transmission of the measured and calculated data over RS485 network. The enclosure provides IP20 rating and can be operated in the temperature range between -20 and +55 °C.Learn More