MX210 modules are compatible with any third-party PLC device if it supports Modbus TCP, MQTT,SNMP or SNTP communication protocols.

Modules can be configured on a PC with a free software ToolPro from akYtec. Modules need to be connected to a PC with a micro USB or Ethernet cable. An external power supply unit is required in case an ethernet cable is used.

It is necessary to restore factory settings by pressing and holding the service button located under the front cover of the module for more than 12 seconds, all while the module is powered on. Now, the device will operate with default parameters.

Yes, MX210 extension modules have this ability.

Yes, terminal block for I/O connections is removable and enables quick and easy replacement of the device.

Any MX210 extension module can simultaneously communicate with up to 4 TCP clients, which facilitates cabling and configuring of the control system.

Modules can be implemented into a star or chain/daisy-chain topology, the latter providing data transfer directly from port 1 to port 2 if the module fails due to device error or power loss, thanks to two bypass-capable Ethernet ports. The maximum le...

Every device from Mx210 product line has galvanic isolation, which is performed differently for each model and in groups, such as power supply, inputs/outputs, interfaces and housing.

No, this voltage source cannot be used for feeding an MV210 module because it doesn’t provide enough current (max. 100 mA).

The register address has to be written in decimal.