The I/O Modules of Mx110 series offer a cost-effective and flexible solution in distributed automation systems. The robust modules carry out on-site measured value acquisition and process control and are very suitable for extension of existing systems as well as for creating of new high-performance systems. Due to the proven RS485 bus technology and intelligent functions, such as pulse counter or sensor state diagnosis, the MX110 modules can be used in different fields, such as building technology, process industry, etc.
No bus coupler or power supply unit is required, like in other decentralized I/O systems. Each module has all comunication and power supply units on board. Thereby also systems with a small number of I/O points can be economically reasonable.
Ordering information
| MU110 | - | 24 | . | 16 | X | |
| Output type | ||||||
| relay outputs | R | |||||
| NPN transistor outputs | K | |||||
Variants
| MU110-24.16R | 24 V DC, 16 relay (NO) |
| MU110-24.16K | 24 V DC, 16 NPN transistor |
| General | |
|---|---|
| Power supply | 24 (20...28) V DC |
| Power consumption, max. | 12 W |
| Digital outputs | 16 |
| Type | relay (NO) |
| Permissible load | 3 A at 250 V AC or 30 V DC |
| Galvanic isolation | in groups of 4 |
| Communication | |
| Interface | RS485 |
| Protocol | Modbus RTU / ASCII |
| Baud rate | 2.4...115.2 kBit/s |
| Environment | |
| Ambient temperature | -20...+55 °C |
| Storage temperature | -25...+55 °C |
| Humidity | up to 80%, non-condensing |
| IP Code | IP20 |
| Enclosure | |
| Dimensions | 63 x 110 x 75 mm |
| Weight | approx. 300 g |
| Material | plastic |
- ePLAN
- STEP Model
 |
 |
 |
| MX110_configurator_v1.1.11.100 |
| MU110-24.16R |
|
ePLAN_MU110-24.16R (*.zip 46.5 mb)
|
|
|
STEP_MU110-24.16R (*.zip 4.37 mb)
|
|