Digital displays

Our universally applicable configurable digital displays are characterized by their compact design and unique enclosure. The T shaped housing combines both a relatively large screen and a very practical mounting solution.

With the exception of the wall mounting version, all process displays from akYtec can be mounted in a 22.5 mm cutout for standard indicator lights or push buttons. These process displays require neither mounting screws nor special rectangular cutouts, which makes their installation on a control panel or control cabinet door quick, easy, and convenient. The wall-mount ITP11-W loop-powered digital display has a universal enclosure which can be snapped onto a DIN rail or attached to a tube.

The rectangular 48x26mm front of these process displays is IP65-rated and is large enough to display 14mm high characters. Up to four 7-segment digits can be displayed either with red or green LEDs, depending on the device variant.

The akYtec process displays differ in the supported signal types. You can choose from a variety of different signals such as 4-20 mA, 0-10 V, RTD, TC, etc., using the following quick selection guide of our digital displays:

In addition to scaling and visualizing the signal, these programmable digital displays support for many other useful functions, such as adjustable decimal point position, square root function, digital filter, i.e. setting the filter time constant, alarm function, error indication, etc. Moreover, two devices, the ITP14 universal process display and the ITP16 temperature display, feature an NPN transistor output which can be used to implement an on-off control of a low voltage relay up to 42 VDC / 200 mA.