- 10 segments three-color indicator.
- Universal input: Supports direct connection of resistance thermometers, thermocouples, pressure sensors, humidity sensors, level sensors, etc. (For more details on the characteristics of measurement sensors, refer to the sensor specifications.)
- Three-color indication: Configurable according to required thresholds.
- Operating modes: Continuous indication of the measured parameter in red and green, similar to the ITP15-M.
- Alarm indication: Triggered by signal interruption or when measurements exceed specified limits.
- Output device: For signaling or control with 200 mA and 42 V.
- Power supply: From an external DC voltage source of 10...30 V.
- Design features:
- Mounts into a 22 mm hole.
- Removable screw terminals.
- Operating temperature range: -40 to +60 °C.
- Enclosure protection rating: IP65 from the front panel.
- Decrease in signal to a critical level.
- Increase in signal to a critical level.
- Deviations from the normal level towards critical decrease or critical increase.
- Current 0...5 mA, 0(4)...20 mA
- Voltage 0(2)...10 V
- RTD: 50/100/1000 Ω Cu, Pt, Ni, M, P
- Thermocouples: B, J, K, N, R
Functionality of ITP15-M:
Display operation
Settings related to display color and indicator border changes are only available through the Tool Pro program when connecting the ITP15-M via USB!
Typical applications with quality parameter display and color change from normal signal level (green) to warning (yellow) and critical (red) are related to the following conditions:
Let's consider an example of the ITP15-M indicator operation and color signaling when the level deviates from the normal level. Five states are defined: normal level, non-critical deviation, and emergency level. Each state has its own indicator color.
The ITP15-M indicator setup allows for the configuration of any user-defined color change thresholds and the corresponding colors within the signal measurement range. The only rule is that the threshold values for each subsequent color zone must be greater than the previous threshold.
|
Parameter |
Meaning |
|
Frame |
|
|
Dimensions |
26×48×65 mm |
|
Ambient temperature |
-40…60 °C |
|
Protection class |
III |
|
IP Code |
front IP65, rear IP20 |
|
Display |
|
|
Display type |
LED, 10 segments |
|
Character height |
14 mm |
|
Display color |
Red\Green\Yellow |
|
Input signal characteristics |
|
|
Number of measurement channels |
1 |
|
Input signal type |
|
|
Input resistance when measuring voltage, no more than |
250 kОm |
|
Input polling time, no more than |
0,3 s |
|
Configuration Interface |
MicroUSB |
|
Power supply |
|
|
Power supply |
10…30 V DC (nominal voltage 24 V) |
|
Power consumption, max. |
1 W |
- What type of signal does the Three-color Universal Indicator ITP15-M support? How should I connect it?
- Can I connect the Three-color Universal indicator ITP15-M to a temperature sensor PT100 directly or should I use a 4-20 mA converter?
- What software do I need to program the ITP15-M?
- What is the IP rating of this display?
- What is the ITP15-M’s accuracy? What about its sample time?
- Is there any galvanic isolation between the input, the output, and the voltage supply circuit?
- What is the maximum distance to connect an RTD or a TC signal to the ITP15-M?
- In what colors is the display available?
- What diameter should the mounting cutout be to install this display?
- Can I connect several Three-color Universal Indicator ITP15-M to the common analog output? How should I connect them, in series or in parallel?
