All Products

With the USB-RS485 bidirectional converter IC4-M, you can create an extra serial port on a notebook or PC and connect a serial device to a free USB port. It provides reliable galvanic isolation between the interfaces. The device is powered directly from the USB port.

The device is designed for bidirectional conversion and data transmission of Modbus RTU/ASCII and Modbus TCP protocols via RS-485 and Ethernet/Wi-Fi communication interfaces, respectively.

2TCR1 is a dual-channel temperature On/Off (Bang/Bang) controller designed for measuring, recording, or automatically regulating temperature, as well as other physical quantities (pressure, humidity, level, flow, etc.). Its key strength lies in independent dual-channel control, allowing for advanced logic like mean value or delta-based regulation. The presence of a second input allows for regulation based on two quantities, calculating either the average value or the difference between the input readings. The presence of RS-485 allows all measured and configurable parameters of the device to be transmitted to the enterprise's dispatching network.

Main features of 2TCR1:

1. Measurement and regulation of physical quantities across two channels:
   • According to a two-position control law;
   • One measured quantity according to a three-position control law;
   • Analog P-control;
   • Weather-dependent control
2. Monitoring of communication loss with actuators.
3. Alarm for measured quantities exceeding specified limits.
4. Programming via MicroUSB.
5. Manual control mode for actuators.

The DTS125L is a temperature sensor for measuring the air temperature for outdoor or indoor areas.

NS5-24 is a reliable, simple budget 5 port unmanaged industrial switch. It is designed to connect nodes within one or several network segments. It supports 10...48 VDC power supply and is DIN-rail mounted.

The SMI2-M is a universal display unit for monitoring industrial processes. It has an RS485 interface and the measured values can be displayed up to four digits. Imagine streamlining multiple devices without the usual technical problems.

Main features of SMI2-M

• Three-color seven-segment indicator (green\red\yellow)
• RS-485 interface with galvanic isolation from power supply.
• Supports Modbus RTU/ASCII protocols in Master/Slave/Spy mode.
• Programming via MicroUSB.
• Displaying values like INT, DINT, WORD, DWORD, REAL, STRING, Portrait , Time.
• Standardised design and fits into a standard 22.5 mm borehole for signal lamps

The ITP14 is a versatile process indicator designed for monitoring and controlling industrial processes. This display features a configurable analog input and a digital output, enabling ON/OFF control functionality. The ITP14's compact and standardized design fits into a standard 22.5 mm borehole for signal lamps, allowing for quick and straightforward installation.

Main features of ITP14

• Analog Input: Accepts 0-10 V or 4-20 mA signals.
• ON/OFF Control: Includes an NPN output for ON/OFF control functionality.
• Signal scaling.
• Alarm Function: Features blinking alerts when setpoints are exceeded.
• Adjustable decimal point position.
• Access protection.
• Standardized Design: Fits into a standard 22.5 mm borehole for signal lamps.

The ITP15 Bar Graph Display is a compact panel-mount process indicator designed to visualize an analog input signal ranging from 0 to 100% with 10 bars, each representing 10%. The input signal can be either a linear voltage signal of 0(2)-10 V or a current signal of 0(4)-20 mA. The ITP15's compact and standardized design fits into a standard 22.5 mm borehole for signal lamps, allowing for quick and simle installation.

Main features of ITP15

• Bar graph indication of the measured value.
• Display range 0...100%.
• 10 two-color bars (green/red) 10% each.
• Configurable analog input (0-5 mA, 0(4)-20 mA, 0(2)-10 V).
• ON/OFF control with an NPN-transistor output.
• 2 modes of blinking (fast/slow).
• Alarm settings.
• Standardized Design: Fits into a standard 22.5 mm borehole for signal lamps.

There is only one device for both colors.

The ITP16 is a temperature indicator for monitoring and control of industrial processes. The device can process linear voltage signals, signals from various RTDs (Pt100, Pt1000, and others) or thermocouples (K, J, and others). This display features a configurable analog input and a digital output, enabling ON/OFF control functionality The ITP16's compact and standardized design fits into a standard 22.5 mm borehole for signal lamps, allowing for quick and straightforward installation.

Main features of ITP16

• Analog Input: Accepts RTDs and thermocouples signals.
• ON/OFF Control: Includes an NPN output for ON/OFF control functionality.
• Signal scaling.
• Alarm Function: Features blinking alerts when setpoints are exceeded.
• Adjustable decimal point position.
• Access protection.
• Standardized Design: Fits into a standard 22.5 mm borehole for signal lamps.