Product Description
- HVAC / building automation
- Energy management systems (EMS)
- Indoor Air Quality (IAQ)
- Hospitals / labs / clean rooms
- Museums / archives, supermarkets
- Swimming pools
- Refrigeration systems
- Paint spray booths
- Pharmaceutical
- Food processing
- Food storage
- Greenhouses, mushroom plants
- Animal rooms
- Textile production
- Paper production
- Drying (ceramic, timber, etc)
- Dustproof and waterproof enclosure for harsh environment
- Available as wall-mount or duct-mount version and with remote probe
- Wide measurement ranges, high accuracy and long-term stability
- Remote temperature probe with fluoroplastic cable for up to +120 °C
- Direct sensor connection with special dust filter for best protection
- Two independent user configurable analog outputs 0-10 V / 4-20 mA
- RS485 Modbus RTU interface for fieldbus networking
Details
The transmitter is intended for measurement of relative humidity, temperature and dew point value in air and non-aggressive gases ensuring high accuracy and stability. PVT100 features two freely configurable analog outputs, RS485 Modbus RTU interface for direct fieldbus networking and a range of built-in or remote probe for various applications.
Areas of application:
Functions and features:
Ordering information
| PVT100 | - | XX | |
| Mounting type | |||
| duct-mount | DM | ||
| PVT100 | - | RP | - | XX | |
| Remote probe | |||||
| Probe cable length | |||||
| 2.5 m (-40...+80 °C) | 2 | ||||
| 5 m (-40...+80 °C) | 5 | ||||
| 2.5 m (-40...+120 °C) | T2 | ||||
| 5 m (-40...+120 °C) | T5 | ||||
Variants
| PVT100-DM | 12 / 24 V DC + RS485 + 2AO + 0...100% RH / -40...+80 °C |
| PVT100-RP-2 | 12 / 24 V DC + RS485 + 2AO + remote probe (2.5 m cable) + 0...100% RH / -40...+80 °C |
| PVT100-RP-5 | 12 / 24 V DC + RS485 + 2AO + remote probe (5 m cable) + 0...100% RH / -40...+80 °C |
| PVT100-RP-T2 | 12 / 24 V DC + RS485 + 2AO + remote probe (2.5 m cable) + 0...100% RH / -40...+120 °C |
| PVT100-RP-T5 | 12 / 24 V DC + RS485 + 2AO + remote probe (5 m cable) + 0...100% RH / -40...+120 °C |
| General | ||
|---|---|---|
| Sensors | combined RH and T sensors | |
| Measurement ranges | 0...100% RH / -40...+80(120) °C | |
| Resolution | 0.1% RH / 0.1 °C | |
| Accuracy | RH = 20...80% | ±2.5% RH / ±0.5 °C |
| RH = 5...20% or 80...95% | ±3.5% RH / ±0.7 °C | |
| Response time | approx. 15 s | |
| Self-diagnostics | full functionality check at start-up | |
| Warm-up time, max. | 1 s | |
| Power supply | 12 / 24 (11...30) V DC | |
| Power consumption, max. | 1.5 W | |
| Communication | ||
| Interface | RS485 | |
| Protocol | Modbus RTU | |
| Baud rate | 1.2...57.6 kBit/s | |
| Galvanic isolation | none | |
| Outputs | ||
| Analog outputs | 2 | |
| Output signal (configurable) | 4-20 mA / 0-10 V | |
| Permissible load | 4-20 mA | < (Us – 10.5 V) / 22 mA |
| 0-10 V | > 250 kohm | |
| Cable connections | screwless terminal blocks | |
| Probe connector | M12, IP68 | |
| Environment | ||
| Ambient temperature | -40...+85 °C | |
| Humidity | up to 100%, non-condensing | |
| IP Code | IP65 | |
| Operating environment | industrial indoor and outdoor places | |
| Enclosure | ||
| Dimensions | 80 x 82 x 55 mm | |
| Mounting | wall mount | |
| Material | grey ABS | |
Documents And Software
Additional Information
FAQ
FAQ
No Questions